Hydrosizer/ Teetered Bed Separator (TBS)
The Hydrosizer/TBS is used by a wide range of Mineral Processors to beneficiate
and classify minerals generally < 5 mm in size. Minerals such as:
- Silica sand is treated using the TBS/Hydrosizer to produce high-grade
sand for concrete products, for glass making or foundry use. The process
can also incorporate the removal of contaminants such as Lignite and
fish from the sand.
- It is also used in Coal Preparation, treating both run-of-mine coals
and the recovery of coal from waste tips.
- Ore Dressing.
- Removal of silica from iron ore
- Separation of minerals from sand such as Ilmenite, Rutile & Zircon
The Hydrosizer/TBS is a hindered settling classifier which, utilises
an upward current of water to create a bed of material within its cell,
the material held in the cell is in a state of 'teeter' and it comprises
a narrow size band. When particles that are larger (or heavier) enter
the cell they penetrate the teetering material and those that are finer
or lighter are displaced to the overflow. By employing an accurate sensing
device with a constant flow of upward current water, well defined separation
is achieved.
Each machine is manufactured to exacting standards with abrasion resistant
linings where necessary and utilises an Electro/Hydraulic control system,
which can if required operate in conjunction with PLC & computer controlled
systems.
There is a range of single cut production machines from the TBS 900 to
TBS 3650
Other machines using the same principles include the Multi Spigot Hydrosizer
often used as a pre-concentrator prior to shaking tables and the Hydrolig
developed to remove deleterious matter such as lignite and fish from sand
& gravel. up to 40 mm in size.
The removal of contaminants from aggregates used in the production of
concrete is likely to become standard practice for operators processing
riverbed or marine dredged aggregates.
Operators treating deposits with high levels of silt would also benefit
from using the Hydrosizer/ TBS.
|